Crawl Space Repair Before & After Photos

This crawl space needed some serious love and attention because it was in rough shape. Isaiah and his crew arrived to the home and first had to remove all the debris and seal the crawl space vents. Then they used CleanSpace crawl space encapsulation system to create a vapor barrier and keep moisture out of the air. They also used the CleanSpace to wrap the bottom of the piers. Then they installed a SaniDry Sedona Dehumidifier, along with a condensation pump. This will control the relative humidity in the air and the condensation pump will remove water collected from the dehumidifier. Now the crawl space looks amazing and is protected from moisture and humidity!

This homeowner reached out to us after discovering that their insulation was falling in their crawl space. They also noticed musty, moldy smells upstairs in their home so they were worried about moisture in their crawl space. One of our System Design Specialists, Foster, went out to the home for a free inspection and he found mold growing in the unenclosed crawl space. After assessing the issues, Foster talked them through how Atlanta Basement Systems could fix their crawl space problems. After creating a customized plan, the homeowner scheduled a time for one our production teams to come out and fix their crawl space.

Matt and his crew were able to transform the space by doing mold remediation with soda blasting and then fully encapsulating the crawl space by sealing the vents, installing an EverLast door, and using the CleanSpace encapsulation system. To finish it off, a SaniDry Sedona was installed to keep relative humidity low and prevent mold. 

Before Atlanta Basement Systems, this crawl space was not encapsulated and had open air vents. This allowed humidity and moisture to get into the crawl space and from there it was getting into the upper levels of the house too. In order to resolve this, we sealed the crawl space vents from the inside. Then we used the CleanSpace encapsulation system to create a vapor barrier, while also giving the crawl space a better appearance. Additionally, we added a SaniDry Sedona to keep humidity levels under control. Now the crawl space looks better and is protected from outside air, moisture, and humidity. 

This homeowner was looking for a solution to keep their crawl space dry so they scheduled an inspection with us. After meeting with one of our System Design Specialists and discussing the options, they wanted to move forward with getting the solution installed. In order to waterproof this crawl space, we used the CleanSpace system with the drainage matting and liner. This will protect the walls and air from any moisture getting in. Additionally we put in EZ-Flow drainage along with a SuperSump pump to remove any water from the crawl space. The crawl space now looks a lot cleaner and brighter and it will stay dry all the time!

Because this home had an unenclosed, dirt crawl space moisture and humidity were getting into the home. Mold was also growing, creating an odor that was seeping into the house. In order to repair this crawl space the crew had to do mold remediation by using soda blasting. They also cleared out any debris and fallen insulation. After it was cleaned out they were able to encapsulate the crawl space by sealing the vents and using the CleanSpace encapsulation system. Additionally, they put in EZ-Flow drainage and a SuperSump to pump any water out immediately. The final touch was adding a SaniDry Sedona Dehumidifier to control relative humidity. Now the crawl space looks better and the home is safer!