Atlanta Basement Systems Before & After Photos

This driveway was extremely uneven and cracked and the homeowner wanted to fix it, without completely replacing the driveway. Concrete removal and installation is very pricey and time-consuming, so they wanted a more efficient solution. To do this, one of our crews used the PolyLevel System. PolyLevel uses the expanding polyurethane foam to raise the concrete back to the desired level. But it is still lightweight and won't sink over time. Additionally, the crew used Nexus Pro to fill the cracks in the concrete. Now the driveway is lifted and looks great!

The customer was dealing with many cracks in his concrete. The concrete in his driveway was also un-level and he was wanting to get it fixed. Cracked and un-level concrete can lead to many different issues, like water infiltration and wash-out, which messes with the structural integrity of the concrete. He gave us a call here at Atlanta Basement Systems and we were able to get a crew out there to help fix these issues. George and his crew installed PolyLevel and NexusPro crack repair. PolyLevel is a high-density foam made of structural polymers, that expands and lifts the concrete to the desired height. The NexusPro crack repair is a silicone-based sealant, that is water-proof and will not deteriorate during the natural contraction and expansion of the concrete. This customer was left happy with the results, and no longer had a bumpy ride up his driveway.

Shortly after moving into this home, the homeowners noticed some issues with their crawl space. They wanted to reduce the damage and prevent future problems from arising so they scheduled a free inspection to see what could be done. After Trey,, one of our System Design Specialists, performed his inspection, he found that excessive moisture in the crawl space was damaging the wooden supports, causing the floor to dip in some areas.

To fix this, we had to first encapsulate the crawl space so that moisture and humidity could no longer get in and damage the foundation. This meant sealing off the vents, installing the CleanSpace encapsulation system, and installing a SaniDry Sedona dehumidifier. Then the SmartJack support system was installed to stabilize the beams.

Now this crawl space and home are safer, protecting this family and their investment in their home.

This sidewalk had sunken significantly, causing an eyesore and major tripping hazard. To repair this, we installed a helical pier to ensure permanent stabilization. Then to raise it all the way to be level, we installed PolyLevel Injection Foam. Now this sidewalk is level and safe and looks so much better!

This customer had issues with a leaking crawl space. There was mold growing in the crawl space due to the moisture and relative humidity levels. These were big concerns for them, so they called us and we were able to set them up with a free inspection. Upon inspection water was found in the crawl space along with a large amount of mold that had grown on the wood. We sent our crew out and they were able to resolve all of these issues. CleanSpace, WaterGuard and a SuperSump pump were installed in the crawl space. All of these work together to keep moisture out of the crawl space. The CleanSpace works as a barrier and allows the water to drain down into the WaterGuard, which takes the water to the super sump pump, which then discharges the water outside and away from the home. This sump pump was installed alongside with Ice Guard which keeps the pump from freezing over, ensuring that there is never a clog and the water drains back into the crawl space. A CleanSpace vent seal was also installed to keep the outside air out, leaving the crawl space completely shut off and dry. The SaniDry Sedona was also used, which is a dehumidifier, the smallest and most efficient that keeps the relative humidity at a certain range, ensuring there is no moisture in the air of the crawl space.